DVB WORLD USB DVB-S2

Key Feature :

• Support DVB-S Protocol (EN 300 744)&DVB-S2 Protocol (EN 302 307)
• Support DVB-Data Protocol (EN 301 192)
• Universal Serial Bus 2.0 Standard
• Digital Satellite TV and Radio Program Receiving
• HDTV (MPEG2&MPEG4/H.264)playing
• Real Time Digital Video Recording (DVR) and Scheduling Recording
• Time-Shifting
• Electronic Program Guide (EPG)
• Still Frame Capture
• Multi Free Channel Preview
• Subtitle
• Satellite / Transponder Auto Scan
• IP PID scanning, IP data broadcasting in LAN
• MPEG2 Video broadcasting in LAN, Generate IP data broadcasting task automatically
• IP MPEG4 media playing, IP MPEG4 media recording
• Internet via Satellite
  DVB data service
  High download speed via satellite bandwidth
• Favorite List
• Full Screen Display
• Multi language Switch
• MPEG-II Software Decoding
• Software Upgradeable
• DiSEqC 1.2 / USALS Support
• IR Remote Controller Available
• Perpare CA & CI Modul Upgrade interface

Specification :

Tuner	Input Terminal: F-type 75 Ohm Receiving Frequency: 950~2150 MHz Tuning Range Input Level: -75~-10dBm Carrier Capture Range : ±5MHz Ambient Temperature: 0°C to +70 °C Support MCPC and SCPC
Demodulator & FEC	DVB-S Symbol Rate: 2~45Msps QPSK filter: Root-raised cosine filter with roll-off 0.35 Punctured codes: 1/2,2/3,3/4,5/6,7/8 and Auto DVB-S2 Symbol Rate:2~30 Mbps FEC QPSK:1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 ???8PSK:3/5, 2/3, 3/4, 5/6, 8/9, 9/10
LNB & Switch control	LNB Supply Voltage: 13V/18V with Short Circuit Protection DiseqC 1.2 Support Data Burst & Tone Burst Antenna and LNB Control: 22KHz Ton Max. LNB Supply Current: 450mA
USB interface	Bus Universal Serial Bus 2.0 Standard????? B Type USB Female Connector
De–multiplexing	No. Section Filtering: 32PIDs Engine: Software Stream Capture: PES &TS
A/V Format	Video Format MPEG-II Main Profile & Main Level Audio Format MPEG-II Audio Layer I & II
Power Adaptor	AC Input: 100 – 240 V ~ 50/60 H DC Output: +9V 2.0A
Options

Compatible CAMs (Conditional Access Module)
Compatible CAM	Version
AlphaCrypt	1.0
Aston I	1.05
Astoncrypt	1.03
BataCrypt	1.0
Conax	4.0/4.00e
Cryptoworks	1.0/12011
Irdeto	1.06/2.09
Nagravision	All
Pentacrypt	1.05
SECA I & II	1.05
Viaccess	1.0 V481/ V483
Zeta Cam	N/A

Microsoft Windows 2000/XP/Vista

Desktop or Notebook

P3 500MHz CPU or above for SDTV

P4 2.0GHz CPU or above for HDTV

128M RAM for SDTV / 256M RAM for HDTV

VGA Card with at the least 16MB Memory

One Free USB 2.0 Port

Microsoft Direct X 8.1 or above

Digital Satellite Dish & LNB

DVB World Box :

USB2.0 Box Power Adapter:

USB2.0 line

Infrared remote control

Quick installation guide

Driver CD (Multi-lingual Software and User's Manual)

NEW Skystar 2

NEW Skystar 2


Ask a question about this product
TechniSat DVB PCI Card The SkyStar 2 TV / PVR is optimally configured for the reception of data streams via satellite, utilizing the DVB broadcast standard. This allows for the use of, among others, high-speed Internet access. The software supplied also enables the reception of digital DVB TV and radio programmes directly into your PC.

TechniSat offers immediately the digital PCI card SkyStar 2 TV / PVR with video recorder solution. Due to the PVR function (personal video recorder) the card enables the record of transmissions in addition to the reception of digital TV and radio programs via satellite. Stopping as well as the delayed recording (timer function) can be used, too. Beyond the possibility of timer programming from the EPG data is given.

The TechniSat SkyStar 2 TV is equipped with a special viewer software.

Specifications :
Video text
Plug & Play enabled
Input frequency range 950 MHz - 2.150 MHz
Symbol rate 2-45 MS/sec., SCPC and MCPC
Operating system WIN 98, SE, ME, 2000, XP
Made in Germany
Tuner input: F-connector
Input impedance: 75 Ohm
Demodulation: QPSK
Viterbi rates: 1/2, 2/3, 3/4, 5/6, 7/8, automatic adjustment
LNC control: 14/18 Volt for polarisation switching
22 kHz and DiSEqC 1.0 for switching frequency range
IF-Bandwidth: 36 MHz
Operating systems: Win 98 SE, Win 2000, Windows XP
System requirements: PC with Pentium II 266 MHz and 32MB RAM (or higher)for data applications
PC with Pentium II 350 MHz and 64MB RAM (or higher) for TV applications
PCI or AGP graphics with min. 8 MB RAM and motion compensation, 3-D support
free PCI slot Technical data SkyStar 2

Recommended Hardware:
TV reception:Intel PIII 700 MHz (or comparable models)
128 MB RAM

Data reception only:
Intel PIII 500 MHz (or comparable models)
64 MB RAM

DREAMBOX 800 HD PVR

 

The Dreambox DM800 supports the Linux TV API have a look to HighDefinition TV on your Dreambox

Features :

- 300 MHz MIPS Processor
- Linux Operating System
- OLED - Display
- MPEG-2 / H.264 Hardware decoding
- Tuner: DVB-S, optional: DVB-C, DVB-T
- Tuner Module, Plug&Play
- 1 x Smartcard-Reader
- V.24/RS232 Interface
- 10/100Mbit Ethernet Interface
- 1 x Scart (RGB, FBAS or S-Video)
- DVI
- 2 x USB 2.0
- Analog modem
- S/PDIF Interface for digital bit stream out (AC-3)
- 64 MByte Flash, 256 MByte RAM
- SATA
for use either as internal SATA HDD 2,5
or to use for extern eSATA
- Unlimited channel lists for TV/Radio
- Channel-change time less 1 second

DBS-Tuner mit DVB-S2 :
Frequency Range 950 … 2150 MHz
Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK)
Symbol rate DVB-S: 2 … 45 Mbaud/s, SCPC/ MCPC
DVB-S2: 10 31 Mbaud/s (8PSK) , 10 30 Mbaud/s (QPSK)

Video decoder : 
Video Compression MPEG-2 and MPEG-1 compatible,
H.246 Video Formats 4:3 / 16:9 Letterbox for 4:3 TV-Device

Audio decoder :
Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main/sub),
Stereo Frequency : 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Output analog :
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB Output digital : 
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz S/PDIF
-Output optical, Toslink

Video parameter :
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

TV-Scart :
Output: FBAS, RGB, S-Video

Serielle Interface RS 232 :
Typ RS232 bidirectional Bitrate 115,2 kBit/s max.
Plug Connector SUB-D-9 Function : Update of Firmware

Ethernet :
10/100 MBit
compatible interface Function : Update of Firmware
Analoge modem : Analoge modem for Internet connection

SATA Interface :
- For use either
as internal HDD 2,5 or
eSATA or internal 2,5? HDD

USB :
2 x USB 2.0 Host

LNB power and polarisation per tuner : 
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical 11,5V at 400mA
LNB Voltage horizontal 17,3V at 400mA

Count of active satellite position :
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION DiSEqC - Rotor Control

Power consumption : 
15 Watt at 12 V

How to guide: Setting up 4 or more LNBs on a Dreambox

How to guide: Setting up 4 or more LNBs on a Dreambox

A quick guide on  how to setup  4 of more LNBs on a Dreambox satellite receiver. For multi sat satellite (Astra, Hotbird, Thor, Sky etc.)

How to guide: Install & fit a hard disk drive into a Dreambox DM800HD

How to guide: Install & fit a hard disk drive into a Dreambox DM800HD

A video guide on how to install and fit a hard drive into a Dream Box DM800HD satellite receiver, shows assembly and disassembly of the receiver. This is useful for use in pausing TV, recording TV, time shifting, pvr functions etc..

 

The video guide tutorial :

How to guide: Install & fit a hard disk drive into a Dreambox DM600

How to guide: Install & fit a hard disk drive into a Dreambox DM600

A video guide on how to install and fit a hard drive into a Dream Box DM600, shows assembly and disassembly of the receiver.

 

The video guide tutorial :

The video is in German but you should be able to work out the basics from it.

Identify : Differences between DM500S and it’ s clones

Identify : Differences between DM500S and it’ s clones

Guide on helping identify clone from genuine Dreambox DM500S receivers. This is a very important step identifying your receiver correctly. Don’t want to put the wrong software/flash on it and end up with a door stop. The DM500S satellite receiver is VERY popular for cloners due to its super low price for such a feature packed machine, most DM500S receivers out there now are actual clones since they have not been made for a long time and are discontinued from Dream Multimedia.

DM500-S front

DM500-S back

DM 500-S front with Remote Control

For the DM 500 Dream Multimedia have a Info page established. On this Page you can see the differences between DM 500 to Clone 500.
If you not sure that your Dreambox is an original or you have a Clone Box contact
Dream Multimedia Mail : plagiate@dream-multimedia-tv.de
for help and Informations.

Security Hologram

Informationen about the Security Hologram klick here
Warrenty Seal
This is a warranty seal of a DM 500.

At the Clone 500 is on the warranty seal a spelling error [moditied instead of modified]

MAC Adresse
The MAC Adresse of a DM500 begins with 00:09:34.
The Mac Adress of a Clone 500 begins not with 00:09:34

Back Side
The Backside of a Clone DM500S shows a bad fixed warranty seal and the housing is pastet with a foil.

How to guide: Identify the differences between a Dreambox DM800HD & a DM800 Clone

How to guide: Identify the differences between a Dreambox DM800HD & a DM800 Clone

This guide may help you identify the key differences between a Dream Multimedia DM800HD genuine receiver and a cheap Chinese DM800HD clone. This information is useful in troubleshooting, upgrades, firmware flashing and other situations where getting the wrong info may do some damage.

The Housing screws of the DM 800 are for tin metal sheet with a rough thread.

The Housing screws of the Clone 800 are with a fine thread.

The screws at the back of the DM 800 differ from those of a clone 800. The screws for the eSATA connector are silver all other screws are black.

The screws at the back of the Clone 800 are silver up to the two housing screws.

SURFACE OF THE HOUSING

The frame cover of DM 800 is painted with a structure.

The frame cover the clone 800 is painted brilliant.

HDMI KABEL

The original HDMI cable of DM 800 is bound together with a rubber band.

The HDMI cable Clone 800 is packed a bag.

POWER SUPPLY UNIT

The original Power Supply Unit of a DM 800 should look in such a way.

This is a Power Supply Unit from Clone Boxes

Modem
The modem of a DM 800 is pasted with a not leading foil and on the back of the modem are components (IC, resistor …) to be seen.

At the modem of a Clone 800 is missing the foil as well as the components.

DREAMBOX SECURITY SIM CARD

The SC in the DM 800 is clearly to recognize marked and with a resin or an glue fixed.

Under the SC Card of a DM800 there are a lot of printed signs.

The SC of the Clone is blanc and not fixed. On new Clone versions are SC Card´s with Hologram.

Under the SC Card of a Clone there are a hand marked sign in this example an “A”.

CPU COOLER

The DM 800 have no CPU Cooler.

The Cloneboxes have a CPU Cooler.

This DM 800 Mainboard are labelet with 800 REV: and the 14 pin connector is right of the sata connector.

On this Clone Box Mainboard is a label with DM800 REV: and the 14 pin connector is left of the sata connector.

SECURITY HOLOGRAM

From July 2008 until June 2009, a Security Hologram was attached on the packing as well as on the rear side of the unit. Newer boxes again ship without this hologram.
Instead, in the future a plugin shall be available, calculating a verification number that can be entered and checked on Dream Multimedia’s website.

How to guide: How to install New cccam on a Eagle box (DM500S clone)

How to guide: How to install New cccam on a Eagle box (DM500S clone)

Quick and easy guide on how to install CCCam on a Eagle Box or other Dreambox DM500S clone satellite receiver. 2 methods.

From Cpanel

– Press blue button twice
– Start here for latest panel
– Follow instructions to install
– Exit, exit, exit
– Blue button twice
– Download emus and cccam 2.0.11 will be there
– Choose version bin if you already have cccam previously installed, or full if you starting from scratch
– Restart Eagle
– Blue button
– Choose cccam 2.0.11 from the top
– Red to start and thatºs it

Manual install

– use tar.gz files assembled by eagle team
– Careful to choose bin version if you have config file on var-etc so it does not overwrite your configurations
– FTP tar.gz file to tmp folder on you eagle
– Press blue twice on your remote
– Addon manager
– Manual install
– Follow instructions
– Exit, exit, exit
– Restart Eagle
– Blue button
– Choose it from top
– Red to restart
– Enjoy

Procedure to uninstall old version if needed

Make sure to stop the cam which you are about to uninstall.
1. Press the Blue Button and set the Default Softcam to Common Interface.
2. Reboot your Eagle.
3. Press Blue Button twice to go into The Eagle Control Panel.
4. Scroll down to Addon Manager then press OK.
5. Highlight the cam you wish to uninstall the press red to uninstall
6. Reboot your Eagle.

Adaptateur Wifi

Location: /Wifi Bridge

Wifi Bridge

Product Information 

The Wifi Bridge is a portable device that allows you to instantly connect supported devices and peripherals (that are usually hard wired) wirelessly through the device’s existing Ethernet (RJ45) port. It supports WEP (64 bit), WEP (128 bit), WPA, WPA2 security. Applications include VoIP ATAs and VoIP Phones, gaming consoles (including the XBox 360), DVB Set Top Box’s (including Dreambox’s, Starview 6, Starview HD Combo, Protek 9600), Media Players and Streamers, NASDrives, Network Printers & Scanners, IP Security Cameras, IP DVR’s and many more.

The Wifi Bridge is very small and compact (9cm x 5cm x 1.5cm), weighs 100 grams and can be hidden away behind your device.

Can be powered from USB socket on satellite box or via 5v dc supply. For DM500s plug the power lead into the Wifi bridge and then

the power lead output from wifi bridge into your DM500s so no extra plug/socket required.

Product Description

VAP11G

Support SSID broadcast;
Frequency: 2.4Ghz

Specification:
1 10/100 base Ethernet port;
1 DC-2.0 female power port for power in;
1 DC-2.0 male power port for power out;
Input Voltage: DC5V-15V;
Consumed Power: Less than 1.5W;
Transmission Distance Indoor: 30m.