.
.

Saturday, April 6, 2013

How to Use Dreambox 500 Without a PC

by Unknown  |  in How to Use Dreambox 500 Without a PC at  8:52 PM

How to Use Dreambox 500 Without a PC

How to Use Dreambox 500 Without a PC

The Dreambox 500 is a Linux-based, set-top cable and satellite television receiver used to pick up and interpret the signals sent from television service providers to show them on a connected display. Since operation of the Dreambox 500 does not require a PC of any sort, the initial setup and function of the Dreambox 500 requires only a few audio/video cables, Internet access and active service with your local cable or satellite provider.


Instructions
Connecting Your Dreambox 500

1RCA cables must connect to matching colored A/V inputs. Connect the Dreambox 500 to a TV using either a set of RCA cables or a single coaxial cable, matching the Out connection points on the back of the Dreambox 500 to the appropriate In connection points on the back of the TV set (for example, the red/yellow/white RCA connectors connect to your Dreambox 500's Out connectors and your TV's In connectors).






2
Coaxial cable connects the Dreambox 500 to your cable or satellite feed.Connect the Dreambox 500 to the home cable line using a coaxial cable. The coaxial cable screws into the Dreambox 500's coaxial input, with the other end of the line connecting to the cable jack on the wall.


3
The Dreambox 500 must connect to the Internet for certain features.Connect an Ethernet cable from the modem or router to the LAN port on the back of the Dreambox 500.


4


Plug the Dreambox 500's power supply into the power supply connector port on the backside of the Dreambox 500. Plug the other end of the power supply into a nearby wall outlet.

5


Open the battery panel on the bottom side of the Dreambox 500 remote control and insert two AA batteries, making sure to align the "+" and "-" ends with the markings inside the remote. Close the battery panel door.


Initial Setup and Using Dreambox 500

6


Power on the Dreambox 500 by pressing the "Power" button on the remote.

7


Power on the TV and select the corresponding input to which the Dreambox 500 is connected by pressing the "Input" or "Source" button on the TV until you see the Dreambox 500's on-screen display.

8


Select the current TV region, language and time zone to complete the initial setup if this is the first time using the Dreambox 500.

9


Use the buttons on the Dreambox 500 remote control to access different functions and control the Dreambox 500. Press the "Menu" button to access the Dreambox 500's main menu and the "TV" button or "Radio" button to activate TV and Radio mode respectively. The "Volume," "Channel" and "Numeric" buttons work the same as they do on any other TV remote.


Thursday, April 4, 2013

Méthode découverte de passe WIFI dans les cybercafés

by Unknown  |  in Méthode découverte de passe WIFI dans les cybercafés at  11:16 PM
Méthode découverte de passe WIFI dans les cybercafés

طريقة اكتشاف كلمة مرور الويفي في مقاهي الانترنت



Méthode découverte de passe WIFI dans les cybercafés
    Suffit de suivre les étapes

D'abord arriver à la «ncpa.cpl» dans «Run» ou «exécuteur»

Méthode découverte de passe WIFI dans les cybercafés
نظغط على 'Statut'
Méthode découverte de passe WIFI dans les cybercafés
ثم 'Propriétés sans fil'
Méthode découverte de passe WIFI dans les cybercafés
' او
Méthode découverte de passe WIFI dans les cybercafés
واخيرا و ليس اخير 'Afficher les caractéres'
Méthode découverte de passe WIFI dans les cybercafés
والنتيجة كلمة سر الويفي

Méthode découverte de passe WIFI dans les cybercafés

Tuesday, March 5, 2013

ProgDVB.v6.84.1.Professional

by Unknown  |  in ProgDVB.v6.84.1.Professional at  5:32 PM
ProgDVB.v6.84.1.Professional



ProgDVB





ProgDVB

Wednesday, February 27, 2013

Dreambox 500 maxvar DM500s

by Unknown  |  in Dreambox 500 maxvar DM500s at  9:10 PM



*ADD Volume_Progress
*2 Skins inside image (Blackredline and Blackblueline)
*Update Satellites.xml
*ADD turkish language inside image
Marwensat2.5
Technical Infos:
* Enigma of: 19.07.2012
* Linux version 2.6.9
* GCC 3.4.4 Original CVS
* Web Interface: Expert
* Busybox 1.0.1
* Tuxtxt v. 1.109
* MaxVAR
Function Buttons:
* BLUE - Smart Panel
* BLUE > 1s - ECM INFO, EMM INFO e PID INFO
* 2x BLUE - Addons
* YELLOW – Plugins
* YELLOW > 1s – CS Info
* GREEN – subservices
* RED - EPG list for active channel
Features:
what's New in Marwensat2.5 ?
*2 bootlogo (special bootlogo for Ramadan)
*ADD Volume_Progress
*2 Skins inside image (Blackredline and Blackblueline)
*Update Satellites.xml
*ADD turkish language inside image
##################################################################################################################### *ADD Hops and ecmtime in Osd
*Movieplayer:Fixed problem no audio with recent versions of Vlc
*Added possibility to toggle between current and next EPG-Entries in single column view
(using audio-button)
*Update for Arabic language(ar.po)
* Movieplayer Fixed (movieplayer work with recent versions of vlc)
* Plugin Movieplayer compiled with cdk(24/02/2012):integrated in image
* Inadyn Fixed
* Add Osd_crypt_on for Skin Blackredline
* Update Satellites.xml
* dvb subtitling fixed
* Support for plaintext subtitles added
* some bugs in cvs Fixed
* you can show ECM info in OSD
* add support for Emu Scam
* add New Driver
* egauge fixed
* Turn off progress_bar for eventview
* Turn off progress_bar for channel list
* Independent Start & Stop CARDSERVER
* Advanced Inadyn service configuration, with log manager
* Setting PVR Movie folder
* Picon support included in Enigma (see var/etc/icon)
* Timeshift fixed
*you can disable Service name update
*Zapstream vlc and Web-x-tv Fixed
* Skin preview fixed
* Languages:Arabic; English; french; italian
* Advanced external programs control
* Can start / stop your own binary by panel (see /var/etc/sample_startup.sh
* Can create your own autostart boot script
(see /var/etc/sample_startup.sh)
* Advanced User Script
* Can run script in kernel mode
* Automount (see /var/script/mount.sh)
* Advanced System info (see /var/etc/script.xml)
* Advanced emu info (see /var/etc/emuscript.xml)
* Parental control shortcut
* emm, ecm support
Plugins:
* Start/Stop Ngrab
* games

Display Function:
* New Skin BlackRedline By Marwen
* Display Snr, Agc, Ber
* Display video info
* Display frequency, polarization, symbol rate
* Display service providers name
* Display CaID, ProvID, PID, hops, ecm time
* Display DC as IRDETO in OSD
* Display long date format
Addons: * Advanced addons Manager - Emus,Plugins,Locale,Picon,Skins * Internet addons download with Proxy support * Manual addons install * Remove installed addons No emu, No keys included








Thursday, February 7, 2013

New TV.Pc 2013 - canal+ gratuit

by Unknown  |  in New TV.Pc 2013 - canal+ gratuit at  2:00 PM
New TV.Pc 2013 - canal+ gratuit






telecharger içi le dossier , deuble clik , choices le numero de la chaine + Enter



 telecharger içi vlc media player  2013 v2.0.5




Wednesday, December 12, 2012

How to Send CCcam Server to DreamBox

by Unknown  |  at  11:00 AM





- Select an option as shown in the picture
2 - Select English
- Put IP Dreambox
4 - Put Page modem
5 - Enter user's name root
- Enter password dreambox
7 - then Click here to start the connection with dreambox


--> 

If the color appears green, it means that he has been successfully connect todreambox and if the red color appears be sure to enter a good data 

Then click FTP


 OPEN var FILE


OPEN etc FILE 

Locate subscription file, and then Select it and send it As is clear in the image

will show you the message click on yes to approve the replacement

as well the file be sent up successfully for Dreambox
For other contributions:
If you have a file subscription Newcamdyou send file to the track
var / tuxbox / config / newcamd
If it subscription file it mgcamd Send to
var / keys
If you have a subscription CCcam sent to
var / etc
 
 

Saturday, December 1, 2012

Trimax TM-6800HD+ (DVB S/S2, DVB-C,DVB-T) Combo HD signal analyzer meter

by Unknown  |  at  10:00 PM

 (DVB S/S2, DVB-C,DVB-T)

Trimax TM-6800HD+ (DVB S/S2, DVB-C,DVB-T) Combo HD signal analyzer meter      Trimax TM-6800HD+ (DVB S/S2, DVB-C,DVB-T) Combo HD signal analyzer meter

 

TM-6800HD+ is the latest HD model of portable signal analyzer meter form TRIMAX TECHNOLOGY LIMITED. By changing the tuner type three types of signal (DVB S/S2, DVB-C,DVB-T), can be easily achieved.
TM-6800HD+ can analyze the waveform DVB signal, analyze the constellation and the spectrum, recording stream, USB services etc. auto-detect the frequency symbol rate and play channels by CI+.
1. Versatile USB services, recording stream, playing recorded program, capturing and browsing picture, specification, software upgrade and etc.
2. User friendly OSD. Spectrum analyzer function max signal hold and TP search.
3. Display the channels constellation diagram dB, signal quality, FEC by the user-defined frequency.
4. Recording real time ASI stream by the port of BNC.
5. 20 Groups of tested data storage and display.
6. Connectiong to PC by mobile storage device, able to modify and browse tested data, soecufucatuib abd yograde, syooirts CI+.
- Sound alarm when lock signal
- Light alarm when lock signal
- Key board backlight lamp can view the keypad at night time
- Digital meter for signal strength and signal quality
- 4.3 Inch TFT LCD screen (16:9), which can play the program
- Blind scan, NIT scan
- Constellation analyzer
- Spectrum analyzer
- Stream recording by ASI
- Descrambling program by CI+
- Recording, play recorded program
- Capturing and browsing picture
- 20 groups of tested data storage
- Edit transponder, frequency, LNB type, symbol rate, QAM etc
- Auto calculate angle of AZ EL
- Upgrade S/W, parameters by PC, USB
- Car-charger
- Fast charge LI-ION  battery (1950Ma), can last around 3 hours
- Easy to carry

3 in 1 combo
DVB-S/S2, DVB-C, DVB-T
Input Frequency
920~2150MHz (DVB-S/S2, 47~865MHz (DVB-C, DVB-T)
Input Level
-80~-20dBm
Input Impedance
75 ohm
Power Out
13/18V (DVB-S/S2), 5/12 (DVB-T), 30V *(DVB-C)
Ku/C-Band
selectable
Min. Level In
About 35dBuV (noise)
Max Level In
About 90dBuV
Display of Signal Level
(analogue) dB on LCD/mknitor
Display of Signal Level
(digital) C/N, BER, FEC, MER
Audio and Video Input/Output
S-VIDEO, HDMI
Easy Satellite Manager
Edit, add and delete
22 KHz Tone
On/off/auto
DiSEqC
1.0, 1.1, 1.2, USALS
Power-supply
100-240V/50/60Hz 14.5V, 1.5Amp
Weight
0.60kg

Sunday, November 18, 2012

DVB WORLD USB DVB-S2

by Unknown  |  at  8:31 PM







Key Feature :
  • Support DVB-S Protocol (EN 300 744)&DVB-S2 Protocol (EN 302 307)
  • Support DVB-Data Protocol (EN 301 192)
  • Universal Serial Bus 2.0 Standard
  • Digital Satellite TV and Radio Program Receiving
  • HDTV (MPEG2&MPEG4/H.264)playing
  • Real Time Digital Video Recording (DVR) and Scheduling Recording
  • Time-Shifting
  • Electronic Program Guide (EPG)
  • Still Frame Capture
  • Multi Free Channel Preview
  • Subtitle
  • Satellite / Transponder Auto Scan
  • IP PID scanning, IP data broadcasting in LAN
  • MPEG2 Video broadcasting in LAN, Generate IP data broadcasting task automatically
  • IP MPEG4 media playing, IP MPEG4 media recording
  • Internet via Satellite
    DVB data service
    High download speed via satellite bandwidth
  • Favorite List
  • Full Screen Display
  • Multi language Switch
  • MPEG-II Software Decoding
  • Software Upgradeable
  • DiSEqC 1.2 / USALS Support
  • IR Remote Controller Available
  • Perpare CA & CI Modul Upgrade interface
Specification :
Tuner
  • Input Terminal: F-type 75 Ohm
  • Receiving Frequency: 950~2150 MHz Tuning Range
  • Input Level: -75~-10dBm
  • Carrier Capture Range : ±5MHz
  • Ambient Temperature: 0°C to +70 °C
  • Support MCPC and SCPC
Demodulator & FECDVB-S
  • Symbol Rate: 2~45Msps
  • QPSK filter: Root-raised cosine filter with roll-off 0.35
  • Punctured codes: 1/2,2/3,3/4,5/6,7/8 and Auto
DVB-S2
  • Symbol Rate:2~30 Mbps
    FEC QPSK:1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
???8PSK:3/5, 2/3, 3/4, 5/6, 8/9, 9/10
LNB & Switch control
  • LNB Supply Voltage: 13V/18V with Short Circuit Protection
  • DiseqC 1.2
  • Support Data Burst & Tone Burst
  • Antenna and LNB Control: 22KHz Ton
  • Max. LNB Supply Current: 450mA
USB interface
  • Bus Universal Serial Bus 2.0 Standard?????
  • B Type USB Female Connector
De–multiplexing
  • No. Section Filtering: 32PIDs
  • Engine: Software
  • Stream Capture: PES &TS
A/V Format
  • Video Format MPEG-II Main Profile & Main Level
  • Audio Format MPEG-II Audio Layer I & II
Power Adaptor
  • AC Input: 100 – 240 V ~ 50/60 H
  • DC Output: +9V 2.0A
Options
Compatible CAMs (Conditional Access Module)
Compatible CAM
Version
AlphaCrypt
1.0
Aston I
1.05
Astoncrypt
1.03
BataCrypt
1.0
Conax
4.0/4.00e
Cryptoworks
1.0/12011
Irdeto
1.06/2.09
Nagravision
All
Pentacrypt
1.05
SECA I & II
1.05
Viaccess
1.0 V481/ V483
Zeta Cam
N/A
  • Microsoft Windows 2000/XP/Vista


  • Desktop or Notebook


  • P3 500MHz CPU or above for SDTV


  • P4 2.0GHz CPU or above for HDTV


  • 128M RAM for SDTV / 256M RAM for HDTV


  • VGA Card with at the least 16MB Memory


  • One Free USB 2.0 Port


  • Microsoft Direct X 8.1 or above


  • Digital Satellite Dish & LNB


  • DVB World Box :
  • USB2.0 Box Power Adapter:


  • USB2.0 line


  • Infrared remote control


  • Quick installation guide


  • Driver CD (Multi-lingual Software and User's Manual)
  • NEW Skystar 2

    by Unknown  |  at  8:28 PM




    NEW Skystar 2



    Ask a question about this product
    TechniSat DVB PCI Card The SkyStar 2 TV / PVR is optimally configured for the reception of data streams via satellite, utilizing the DVB broadcast standard. This allows for the use of, among others, high-speed Internet access. The software supplied also enables the reception of digital DVB TV and radio programmes directly into your PC.

    TechniSat offers immediately the digital PCI card SkyStar 2 TV / PVR with video recorder solution. Due to the PVR function (personal video recorder) the card enables the record of transmissions in addition to the reception of digital TV and radio programs via satellite. Stopping as well as the delayed recording (timer function) can be used, too. Beyond the possibility of timer programming from the EPG data is given.

    The TechniSat SkyStar 2 TV is equipped with a special viewer software.

    Specifications :
    Video text
    Plug & Play enabled
    Input frequency range 950 MHz - 2.150 MHz
    Symbol rate 2-45 MS/sec., SCPC and MCPC
    Operating system WIN 98, SE, ME, 2000, XP
    Made in Germany
    Tuner input: F-connector
    Input impedance: 75 Ohm
    Demodulation: QPSK
    Viterbi rates: 1/2, 2/3, 3/4, 5/6, 7/8, automatic adjustment
    LNC control: 14/18 Volt for polarisation switching
    22 kHz and DiSEqC 1.0 for switching frequency range
    IF-Bandwidth: 36 MHz
    Operating systems: Win 98 SE, Win 2000, Windows XP
    System requirements: PC with Pentium II 266 MHz and 32MB RAM (or higher)for data applications
    PC with Pentium II 350 MHz and 64MB RAM (or higher) for TV applications
    PCI or AGP graphics with min. 8 MB RAM and motion compensation, 3-D support
    free PCI slot Technical data SkyStar 2

    Recommended Hardware:
    TV reception:Intel PIII 700 MHz (or comparable models)
    128 MB RAM

    Data reception only:
    Intel PIII 500 MHz (or comparable models)
    64 MB RAM

    DREAMBOX 800 HD PVR

    by Unknown  |  at  8:22 PM




     





    The Dreambox DM800 supports the Linux TV API have a look to HighDefinition TV on your Dreambox

    Features :

    - 300 MHz MIPS Processor
    - Linux Operating System
    - OLED - Display
    - MPEG-2 / H.264 Hardware decoding
    - Tuner: DVB-S, optional: DVB-C, DVB-T
    - Tuner Module, Plug&Play
    - 1 x Smartcard-Reader
    - V.24/RS232 Interface
    - 10/100Mbit Ethernet Interface
    - 1 x Scart (RGB, FBAS or S-Video)
    - DVI
    - 2 x USB 2.0
    - Analog modem
    - S/PDIF Interface for digital bit stream out (AC-3)
    - 64 MByte Flash, 256 MByte RAM
    - SATA
    for use either as internal SATA HDD 2,5
    or to use for extern eSATA
    - Unlimited channel lists for TV/Radio
    - Channel-change time less 1 second

    DBS-Tuner mit DVB-S2 :
    Frequency Range 950 … 2150 MHz
    Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK)
    Symbol rate DVB-S: 2 … 45 Mbaud/s, SCPC/ MCPC
    DVB-S2: 10 31 Mbaud/s (8PSK) , 10 30 Mbaud/s (QPSK)

    Video decoder : 
    Video Compression MPEG-2 and MPEG-1 compatible,
    H.246 Video Formats 4:3 / 16:9 Letterbox for 4:3 TV-Device

    Audio decoder :
    Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
    Audio Mode Dual (main/sub),
    Stereo Frequency : 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

    Output analog :
    Output Level L/R 0,5 Vss on 600 Ohm
    THD > 60 dB (1 kHz)
    Crosstalk < -65 dB Output digital : 
    Output Level 0,5 Vss on 75 Ohm
    Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz S/PDIF
    -Output optical, Toslink

    Video parameter :
    Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
    Teletext filter in conformity with ETS 300 472 Standard

    TV-Scart :
    Output: FBAS, RGB, S-Video

    Serielle Interface RS 232 :
    Typ RS232 bidirectional Bitrate 115,2 kBit/s max.
    Plug Connector SUB-D-9 Function : Update of Firmware

    Ethernet :
    10/100 MBit
    compatible interface Function : Update of Firmware
    Analoge modem : Analoge modem for Internet connection

    SATA Interface :
    - For use either
    as internal HDD 2,5 or
    eSATA or internal 2,5? HDD

    USB :
    2 x USB 2.0 Host

    LNB power and polarisation per tuner : 
    LNB Current 500mA max.; short-circuit-protected
    LNB Voltage vertical 11,5V at 400mA
    LNB Voltage horizontal 17,3V at 400mA

    Count of active satellite position :
    DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION DiSEqC - Rotor Control

    Power consumption : 
    15 Watt at 12 V



    Thursday, November 15, 2012

    How to guide: Setting up 4 or more LNBs on a Dreambox

    by Unknown  |  at  3:11 PM
    How to guide: Setting up 4 or more LNBs on a Dreambox
    A quick guide on  how to setup  4 of more LNBs on a Dreambox satellite receiver. For multi sat satellite (Astra, Hotbird, Thor, Sky etc.)
    multi lnb setup on spiderbox

    Thursday, October 25, 2012

    How to guide: Install & fit a hard disk drive into a Dreambox DM800HD

    by Unknown  |  in How to guide at  3:47 PM

    How to guide: Install & fit a hard disk drive into a Dreambox DM800HD

    A video guide on how to install and fit a hard drive into a Dream Box DM800HD satellite receiver, shows assembly and disassembly of the receiver. This is useful for use in pausing TV, recording TV, time shifting, pvr functions etc..
    Dream Multimedia Dreambox DM600 satellite receiver hard drive fitting video guide 

    The video guide tutorial :

    How to guide: Install & fit a hard disk drive into a Dreambox DM600

    by Unknown  |  in How to guide at  3:46 PM

    How to guide: Install & fit a hard disk drive into a Dreambox DM600

    A video guide on how to install and fit a hard drive into a Dream Box DM600, shows assembly and disassembly of the receiver.
    Dream Multimedia Dreambox DM600 satellite receiver hard drive fitting video guide 

    The video guide tutorial :
    The video is in German but you should be able to work out the basics from it.

    Identify : Differences between DM500S and it’ s clones

    by Unknown  |  in Identify at  3:46 PM
    Identify : Differences between DM500S and it’ s clones
    Guide on helping identify clone from genuine Dreambox DM500S receivers. This is a very important step identifying your receiver correctly. Don’t want to put the wrong software/flash on it and end up with a door stop. The DM500S satellite receiver is VERY popular for cloners due to its super low price for such a feature packed machine, most DM500S receivers out there now are actual clones since they have not been made for a long time and are discontinued from Dream Multimedia.
    dreambox dm500s clones
    DM500-S front
    BILD:DM500S front 01 klein.jpg
    DM500-S back
    BILD:DM500S back 02 klein.jpg
    DM 500-S front with Remote Control
    BILD:DM500S front rc 01 klein.jpg
    For the DM 500 Dream Multimedia have a Info page established. On this Page you can see the differences between DM 500 to Clone 500.
    If you not sure that your Dreambox is an original or you have a Clone Box contact
    Dream Multimedia Mail : plagiate@dream-multimedia-tv.de
    for help and Informations.
    Security Hologram
    Informationen about the Security Hologram klick here
    Warrenty Seal
    This is a warranty seal of a DM 500.
    Bild:Garantie DM500.jpg
    At the Clone 500 is on the warranty seal a spelling error [moditied instead of modified]
    Bild:Garantie Clone500.jpg
    MAC Adresse
    The MAC Adresse of a DM500 begins with 00:09:34.
    The Mac Adress of a Clone 500 begins not with 00:09:34
    Bild:Clone 500 unten.jpg
    Back Side
    The Backside of a Clone DM500S shows a bad fixed warranty seal and the housing is pastet with a foil.
    Bild:Clone 500 back.jpg

    Proudly Powered by Blogger.